How do I change settings on Infinity feeding pump?
56 second clip suggested1:45How to change alarm settings on Moog Enteralite Infinity PumpYouTubeStart of suggested clipEnd of suggested clipSo the first thing that you do is you push the on/off button and the plus button you push themMoreSo the first thing that you do is you push the on/off button and the plus button you push them together and hold them down for one-and-a-half seconds.
How do you program Enteralite Infinity pump?
58 second clip suggested20:16Infinity Pump Instructional Video – YouTubeYouTubeStart of suggested clipEnd of suggested clipPress the plus or minus key until you reach the desired dose. You can also program a continuous orMorePress the plus or minus key until you reach the desired dose. You can also program a continuous or infinite dose by pressing the plus key until INF appears in the display.
How do you reset a Enteralite Infinity pump?
Press RATE/DOSE key to transition between rate and dose settings. Press CLEAR key to reset displayed function to its minimum value. Press and hold for three seconds to clear rate, dose, feed interval and volume delivered to minimum values at the same time.
How long does Infinity pump charge last?
Battery Information pump will run for 24 hours if the pump is running less than a rate of 125 mL/hour. in the lower right hand corner. Each bar on the fuel gauge represents about 6 hours of battery charge.
How do you manually Prime An Infinity pump?
50 second clip suggested6:46Tubie2go – Moog Infinity Feed Bag: Manual Prime – YouTubeYouTube
How do you unlock a feeding pump?
38 second clip suggested0:50Temporarily Locking the Input Screen of the Kangaroo Connect™ Enteral …YouTube
How do I change the volume on my Infinity pump?
49 second clip suggested1:45How to change alarm settings on Moog Enteralite Infinity PumpYouTube
How do you manually prime a feeding tube?
Manual priming may be faster.
- To prime the tubing manually, squeeze any air out of the bag and close it. Remove the cassette from the pump.
- To prime the pump using the prime feature, push and hold the prime button until the formula reaches the end of the tubing. Release the prime button.
How do you prime a feeding pump?
40 second clip suggested1:00Priming the Kangaroo™ ePump Enteral Feeding Pump – YouTubeYouTube
How do you set up a feeding pump?
58 second clip suggested10:55Setting Up and Operating the Kangaroo™ Connect Enteral …YouTube
How do you prime feed a pump?