Can you use a 10 speed crankset with 8 speed?
If the sprocket thickness and spacing is the same as a 9 speed crankset then it should work fine. On the other hand, a 8 speed chain would not work with a 10 speed cassette. you can use any chainset you want.
Can you use a 11-speed crankset on a 8 speed?
Accordingly, an 11-speed chain will work on an 8-speed chainset (the chain will fit over the teeth) but you may find changing between chainrings is not as slick, because the gap between them is larger on an 8-speed chainset than an 11-speed and the chain is narrower.
Will a 9 speed crankset work with 8 speed?
Yes, there are no complications with running a 9 speed crankset on an 8 speed drivetrain. Strictly speaking, one crankset will have been manufactured for an 8-speed chain, the other will have been manufactured for a 9-speed chain. That is basically the difference between the two.
Will 8 speed chainring work with 10 speed cassette?
First, to answer the question asked: you can use them physically, but the shifting performance will suffer. Second, there is no limitation on the wheel, for a campy 8 speed hub. Put a 10 speed campy group on the bike. 8/9/10 speed are all the same, unless you truly have a freewheel, as opposed to a cassette.
Are 8 and 9 speed chainrings interchangeable?
Yes; as long as you get a 7/8/9 speed compatible chainring set. If you mean a strictly 9 speed labeled chainring set; Maybe. The more I look it seems opinion is divided between whether 6/7/8 speed chainrings are interchangeable with 9 speeds or not.
Will an 8 speed chain work on a 9 speed cassette?
The 9 speed chain is thinner than the 8 speed which suggest the 9 speed cassette has thinner teeth. No, no problems, it works fine. The cogs on 9sp and 8sp are the same thickness, the difference is the thickness of the spacers between them.
Can a 10-speed crankset be used on a bicycle with 8-speed chain?
Typical example: can a crankset for 9 speeds be used with a bicycle that has 11 speeds (rear sprockets) and an 11 speed chain (for 11 sprockets)? Or vice versa: can a 10 speed crankset be used on a bicycle with 8 speeds? All the “speed” chains have almost the same inner diameter (roller width).
Do 8 and 9 SPD chains work on 9spd cranks?
– 9 spd front mechs are slightly narrower. However they do work fine on either: just a little more tinkering maybe required. Now, I have bound to have c0cked that up somewhere, and its not set in stone. Some quirly combos out there! – 8 and 9spd chains work on 9spd cranks.
Can I mix road cranksets with MTB FDS?
For example: an 8 speed crankset on a bicycle with 10 rear sprockets and a 10 speed chain (a), or a triple chainring with a front derailleur ( FD) constructed for double chainrings (b). It will also address mixing road cranksets with MTB FDs and vice versa (c). please take the 5 minutes needed to read the compatibility articles use instructions.
What is the difference between Shimano 8 and 10 speed cassettes?
The newer, narrower chains are weaker and harder to service. Though shifters are different for 8, 9 and 10-speed cassettes, the same rear derailers index properly with 7- through 10-speed Shimano cassettes. Most Shimano-compatible freewheel bodies accept 8-speed cassettes..