What causes rear drum brakes to drag?
Brake dragging is commonly caused by broken or weak springs on the drum brakes. It can also be due to a corroded or jammed caliper piston or a caliper that has corroded bushings or mounting pins. Additionally, brake dragging can also be caused by frozen emergency brake cables as well as overextended self-adjusters.
Why are my brakes not as responsive?
If your brakes are not as responsive as they should be or if the pedal “sinks” toward the floor, this could be an indication of a leak in the braking system. It could be an air leak (in the brake hose) or a brake fluid leak. Brake fluid looks similar to fresh motor oil, but with a less “slimy” texture.
How do I stop my brakes from dragging?
To prevent brake drag, a caliper must remain in correct alignment relative to the rotor. Over time, a caliper may come out of alignment. If the issue grows severe enough, one of the brake pads may remain in contact with the rotor surface at all times.
Why does my brake pedal go to floor sometimes?
One of the more common causes for the brake pedal going to the floor is a loss of brake fluid. When you’re out of brake fluid, your brakes simply won’t work. Another possible cause is a bad brake master cylinder. The master cylinder is where brake fluid gets compressed.