How much current can a stepper motor take?
Stepper motors have a rated voltage and current. A typical stepper motor like our NEMA 17 might have a rated voltage of 2.8 Volts and a maximum current of 1.68 Amps. This basically means if you hook it up to 2.8 Volts it will draw 1.68 Amps.
What is the strongest stepper motor?
The 80MPH Series 86-mm-flange stepper motors and the 80MPD 56-mm-flange motors are said to be among the most powerful motors currently available with regard to holding torque and length.
How much torque can a stepper motor generate?
For example, a conventional size 34 stepper motor can produce 5.9 N-m of holding torque. The ultra-high-torque version of the same motor produces up to 9 N-m of holding torque. For a conventional motor to achieve this same torque rating would require a 31% longer motor.
How many watts do stepper motors use?
x. If you are actually using 2 phase steppers with a maximum of 4.5 A (the capability of the controller), then you might expect 4.5^2 * 0.6 = 12 W per phase. If you use x2 (400 step, which is half step) micro-stepping then with both phases on you’d get maximum dissipation of about 24 W.
How strong is a NEMA 17 stepper motor?
This NEMA 17-size hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 1.7 A at 2.8 V, allowing for a holding torque of 3.7 kg-cm (51 oz-in).
How much voltage does a stepper motor need?
Generally, 12 [V] is the smallest voltage used to drive actuator motors, with higher voltages at 24 [V], 48 [V] and even 80[V] being used for motion control systems. A good rule of thumb is to use between 10 and 24 times the motor’s nameplate voltage for the system bus voltage.
What is NEMA 23?
NEMA 23 is a stepper motor with a 2.3×2.3 inch (58.4×58.5 mm) faceplate and 1.8° step angle (200 steps/revolution). Each phase draws 2.8 A at 3.2 V, allowing for a holding torque of 19 kg-cm. NEMA 23 Stepper motor is generally used in Printers, CNC machine, Linear actuators and hard drives.