How do you reset the drum on a Brother HL 5340D?

Posted on by Muna Meyer

How do you reset the drum on a Brother HL 5340D?

7 Press and hold down the Go for about 4 seconds until all the LEDs light up. Once all four LEDs are lit, release Go. ! IMPORTANT Do not reset the drum counter when you only replace the toner cartridge.

How do I replace the drum in my Brother printer?

  1. Make sure that the machine is turned on.
  2. Open the front cover.
  3. Take out the drum unit and toner cartridge assembly.
  4. Push down the green lock lever and take the toner cartridge out of the drum unit.
  5. Unpack the new drum unit.
  6. Put the toner cartridge firmly into the new drum unit until you hear it lock into place.

Why does my Brother printer says replace drum?

The Brother machine will display a ‘Replace Drum’ or ‘Drum Stop’ message when the machine has printed approximately 15,000 pages. The drums should be replaced as a set in order to maintain print quality. Unlike the toner cartridges, the drum change is not automatically detected by the machine when they are replaced.

How do you reset the drum on a Brother printer HL l2360dw?

How to reset the drum counter:

  1. Open the front cover.
  2. Press and hold the “OK” button for 2 seconds to display the “Drum Unit” option, then press “OK”.
  3. Press the “up” arrow button to reset the counter.

How do you replace the drum on a Brother HL 5250DN?

How to: Reset the drum counter on Brother HL-5250DN

  1. Step 1: Open the front door.
  2. Step 2: Remove the drum unit.
  3. Step 3: Press the Go button until all the lights are amber.
  4. Step 4: Release the Go button.
  5. Step 5: Insert new drum unit.
  6. Step 6: Close the front door.

How do you reset the drum counter on a Brother HL 5370DW?

Replace Drum

  1. Make sure that the machine is turned on.
  2. Open the front cover.
  3. To reset the drum counter, press and hold down Go for about 4 seconds until all the LEDs light up. Once all four LEDs are lit, release Go.
  4. Close the front cover.
  5. Make sure that the Drum LED is now off.

How do you change the drum on a Brother HL L2370dw?

Replacing the drum unit Remove the toner cartridge and drum unit assembly from the machine. Push down the green lock lever and take the toner cartridge out of the drum unit. Unpack the new drum unit. Push the toner cartridge firmly into the new drum unit until you hear it lock into place.

How do I reset my Brother HL L2320D drum?

How to reset the drum counter:

  1. Open the front cover.
  2. Press and hold the “Go” button until all LEDs light up. Once they are lit, release the button.
  3. Close the front cover.
  4. The Drum LED should now be off.

What do I do when my printer says replace drum?

If you reset the drum counter during the life of the drum unit currently being used, the remaining drum life will not be displayed accurately.

  1. Make sure that the machine is turned on.
  2. Open the front cover.
  3. Press and hold OK for 2 seconds.
  4. Press the Up arrow key or 1 to reset the drum counter.
  5. Close the front cover.