How does GeyserWise work?
The geyser temperature probe provided by GeyserWise has a built in probe that measures the temperature in the geyser. It also supplies information to the element whether it should switch on or not. The GeyserWise geyser temperature probe incorporates a thermal cut out to prevent electrical overheating.
How do I reset my GeyserWise Tse?
If at any stage you would like to reset the timers back to the factory defaults, press and hold the button for six seconds. On release, the timers will be reset to the factory default. To set the device to Power Save Mode, press and hold the button for six seconds. Only the temperature display will be on.
How to set timer on GeyserWise?
56 second clip suggested2:53Setting Geyserwise Timers – YouTubeYouTubeStart of suggested clipEnd of suggested clipTo get to the timers we press the set button until Monday to Friday starts flashing and the one onMoreTo get to the timers we press the set button until Monday to Friday starts flashing and the one on indicates that we’re looking at the time of a number one to come on three o’clock in the morning.
How many solar panels do I need for a 200l geyser?
200l Geyser requires 4x 335w panels. Can be added to as part of a solar PV installation.
What does E4 mean on Geyserwise?
The E4 error according to the manual is heat loss or faulty element, and refers to element failure, but they do not refer to incorrect reading from the probe. The fact that the pressure valve works, indicates the element is on and working with out any temperature control.
What is thermostat in geyser?
The thermostat acts as a coordinator between the element. When the water in the top part of the geyser is hot enough, it lets the thermostat go into action. When the thermostat senses the water in the geyser is too cool it turns on the element. This happens only after the element of the geyser has finished heating.
How do I reset my GeyserWise thermostat?
The GeyserWise geyser temperature probe incorporates a thermal cut out to prevent electrical overheating. The live feed to the element will be broken at temperatures above 90°C. When the cut out switches off, it needs to be reset manually by pressing the red button on the thermal cut out.
What does E4 mean on GeyserWise?
How do I set my intelligent hot water control?
49 second clip suggested3:43Setting the South African Solar Water Heating Controller – Geyserwise MaxYouTube
How do I convert my electric geyser to solar?
We can Re-Use your existing NORMAL geyser and CONVERT it into a solar geyser, saving you the cost of a new geyser. We can do this by adding a special CONVERSION valve to your geyser. This valve enables us to add a solar panel and a circulation pump to your geyser. This GeyserWISE, also acts as a Timer for your element.
What does E1 mean on geyser?
Error E1 is displayed on the control panel. The overheat sensor has been turned on. The sensor will reset if the unit is unplugged. The unit needs to be plugged back in.
What is the maximum temperature of geyser?
Water geysers have a temperature range of 40-75 degree. Most geysers availabe in market have a default thermostat setting of 60 degree or high. This means that water in your geyser will be heated till it reaches a temperature of 60 degrees or high.