How do I create a VLAN on my router?

Posted on by Muna Meyer

How do I create a VLAN on my router?

  1. Step 1: Create VLANs (VLANs 10 and 20) on the switch. Description. Command. Enter global configuration mode. Switch# conf t.
  2. Step 2: Assign the VLANs to switch ports. Description. Command. Enter global configuration mode.
  3. Step 3: Configure the IP addresses on the router. Description. Command. Enter global configuration mode.

How do you assign a VLAN to a router interface?

To name a VLAN on a switch, use the name command in VLAN configuration mode. To set the interface type, use the switchport mode command in interface configuration mode. To set the VLAN when the interface is in access mode, use the switchport access vlan command in interface configuration or template configuration mode.

How do I setup a VLAN?

First, VLAN support needs to be enabled on the switch if it is not already:

  1. Choose Switch configuration.
  2. Choose Advanced Features.
  3. Choose VLAN Menu…
  4. Choose VLAN Support.
  5. Set Enable VLANs to Yes if it is not already, and choose a number of VLANs.
  6. Restart the switch to apply the changes.

How do I find the VLAN on my router?

Specifies a single port number or a range of ports (for example, a1-a16 ) , or all for which to display information. Displays detailed VLAN membership information on a per-port basis….Syntax:

Port name The user-specified port name, if one has been assigned.
VLAN ID The VLAN identification number, or VID.

How do I find VLAN details?

The show vlans command lists the VLANs currently running in the switch, with VID, VLAN name and VLAN status. Dynamic VLANs appear only if the switch is running with GVRP enabled and one or more ports has dynamically joined an advertised VLAN. In the default configuration, GVRP is disabled.

How do I access a VLAN?

The process to configure a Layer 2 interface as an access port assigned to a specific VLAN involves 2 steps:

  1. Step 1: Configure the interface to operate in access mode using the command switchport mode access.
  2. Step 2: Assign the interface to the desired VLAN using the switchport access vlan command.

What is VLAN in IP Address?

VLAN vs Subnet: What’s the Difference?

Parameter VLAN
Definition VLAN is a logical LAN that contains broadcasts within itself, and only hosts belonged to that VLAN will see those broadcasts.
Logical and Physical Network VLAN allows us to create different logical and physical networks.

What is VLAN example?

Each virtual switch, or VLAN, is simply a number assigned to each switch port. For example, the two switch ports in the red mini-switch might be assigned to VLAN #10 . The two ports in the orange mini-switch might be assigned to VLAN #20 .