What are eaves overhang?
Eaves are located at the down-slope edge of a sloped roof and serve as the transition between the roof and fascia/wall. Overhangs are extensions of the roof beyond the exterior wall (i.e., the joists, rafters, or trusses and the decking they support cantilever past the wall).
What is overhang of roof called?
Soffit: The underside of the eaves, or roof overhang, which can be enclosed or exposed.
What is the overhang at the roof soffits?
The underside of this overhang, when given a finished appearance, is known as the soffit, which means “something fixed underneath”. The soffit is basically, any finishing material, such as wood or fiber cement, that is installed to cover the underside of your roof overhang.
How far do soffits overhang?
The typical maximum overhang is 2 feet. Roof overhangs are the amount that the roof hangs over the top of the siding in residential home construction. The siding underneath the overhang is known as the soffit. Overhangs are common in most house designs, providing protection against both wind and rain.
How much should eaves overhang?
Overhangs can vary from a few inches to a few feet depending on preference; however, the suggested width of an overhang is between 12” and 18” for eaves and no more than 8” for rakes. That said, overhangs can extend as far as 2′ without the need for external supports.
How far can eaves overhang?
Two feet is the general maximum length for a typical roof overhang. This will protect a roof from most types of damage. Roof overhangs can extend farther than 2 feet, but beyond this length, they begin to lose structural integrity and require external support.
Are eaves and soffits the same thing?
Eaves are usually made of wood and then covered with roofing material. Soffit materials coordinate with siding and fascia boards on the exterior walls, and generally follow the aesthetics of the residence.
How do you cover roof eaves?
In some home construction, the eaves are left exposed, which leaves the ends of the roof rafters visible. You can enclose the eaves by installing soffit panels. These are panels made of vinyl or metal that create a solid cover over the eaves.
How far should eaves overhang?
How much should a rain overhang?
There is no true standard size for overhangs, but typical overhangs that are used for protection from rainfall are 16-18 inches wide. Overhangs wanted for shading should be minimally 24 inches.