How do you reset the TPMS on a Audi a6 MMI?

Posted on by Muna Meyer

How do you reset the TPMS on a Audi a6 MMI?

How to Reset the TPMS in Your Audi

  1. Make sure the car is turned on (the engine doesn’t need to be running).
  2. Press the car button on the MMI® control panel and select the systems control button.
  3. Select Vehicle > Service & checks > Tire pressure monitoring > Store tire pressure > Yes, store now.

Does Audi use TPMS?

TPMS Direct – Audi OE TPMS Explained. Audi has been keeping up with TPMS technology since 2002. Starting with the optional system on the A8 and S8, they then threw the system on their whole line to comply with the recent law. They have used several valve sensors.

How do you reset the TPMS on a 2016 Audi a6?

Here’s how to do it:

  1. Turn ignition switch to ON position but do not start the engine.
  2. From the Home screen, tap the VEHICLE menu on the MMI display. The MMI display is located on the center console.
  3. Select SETTINGS & SERVICE.
  4. Select TIRE PRESSURE MONITORING.
  5. Select STORE TIRE PRESSURE.
  6. Select YES to execute the TPMS reset.

How do I enable TPMS?

TPMS Sensor Matching

  1. Set the parking brake.
  2. Turn the ignition switch to ON/RUN with the engine off.
  3. Press and hold the keyless-entry fob transmitter’s LOCK and UNLOCK buttons, at the same time, for about five seconds to start the TPMS learn mode.

Does Audi tell you which tire is low?

Warning Messages on Dashboard You might see the TPMS warning on your Audi dashboard, which is a yellow warning icon noted by an exclamation point. A text message below the icon might tell you that pressure in one of the tires is low.

What does TPMS mean on Audi?

Tire Pressure Monitoring System
The purpose of the TPMS (Tire Pressure Monitoring System) is to alert you when tire pressure is too low and could create unsafe driving conditions. If the light is illuminated, it means your tires could be underinflated, which can lead to undue tire wear and possible tire failure.

How do I check the TYRE pressure on my Audi a6?

Audi: How to Check Tire Pressure

  1. Step 1 – Comply with PSI recommendations. Comply with the pounds per square inch (PSI) rating for your tires, as recommended by Audi.
  2. Step 2 – Monitor the tire pressure warning light. Your Audi is equipped with a tire pressure monitoring system (TPMS).
  3. Step 3 – Use a tire pressure gauge.

How do I turn off the alarm on my Audi A6?

To deactivate the alarm, switch on the ignition or press the button on the remote control key. When the Audi A6 is locked, the alarm will be triggered if movements are detected in the interior (e.g. by animals) or if the Audi A6’s inclination is changed (e.g. during transport).

What type of TPMS does Audi use?

The Audi A4 (S4 8E B6, S4 8E B7, S4 8K B7) is manufactured with an indirect and a direct TPMS system, depending on the year. Direct TPMS has TPMS sensors installed in the wheel; if one or more tires indicate low tire pressure, the TPMS sensors will transfer the information to the vehicle’s ECU.

How do you check Audi tire pressure?

Press the car function button on the MMI® control panel and select the (Car) Systems control button. Select Servicing and checks. Then, select Tire pressure monitoring. Click on Store tire pressures.