What are the different kinds of fabric defects?
Different types of defects which are found in garments industry and their remedies.
- Seam Puckering.
- Open seam or broken seam.
- Broken Stitch.
- Drop stitch/Skipped stitch.
- Uncut/ loose thread.
- Distorted knitting.
- Seam slippage.
- Causes:
What are the four types of weaving?
What are some of the most common weaves?
- Plain Weave. Plain weave is the simplest weave.
- Basket Weave. A basketweave fabric is an alternative form of the plain weave.
- Twill Weave. Twill weave is among the most commonly used weaves in textile processing.
- Satin Weave.
What are the 3 types of weave patterns?
In weaving, lengthwise yarns are called warp; crosswise yarns are called weft, or filling. Most woven fabrics are made with their outer edges finished in a manner that avoids raveling; these are called selvages. They run lengthwise, parallel to the warp yarns. The three basic weaves are plain, twill, and satin.
What are the eight knitting defects?
The major defects in Knitted fabrics be it flat knit or circular knit are as below:
- Barre.
- Streakiness.
- Imperfections.
- Contaminations.
- Snarling.
- Spirality.
- Spandex Jump.
- Spandex miss.
What is Barre defect?
Barré is an unintentional repetitive horizontal pattern in fabrics that is generally undesirable and considered as a defect. Barré occurs for many reasons associated with the manufacturing of textile ensembles like fiber, yarn, fabric manufacturing, weaving or knitting, or finishing faults.
What are the fabric defects and causes?
Glossary of Defects
| Defect | Severity |
|---|---|
| Drop Stitching | Major |
| Dropped Pick | Major |
| Drawbacks | Major |
| Dye Streak in Printing | Major |
What are the different techniques of weaving?
Some of the most popular weaving techniques are the plain, twill, and five-harness satin weave. The plain weave is the simplest weaving technique and is accomplished by passing the weft thread over and under each warp thread at a right angle.
How many types of weaves are there in India?
India is home to more than 136 unique weaves, mostly in the form of sarees.
What are finishing defects?
Most finishing defects are the result of technician error or contaminants entering the spray booth, typically during the painting or drying process. While most finishing defects are preventable, correcting them can result in hours of additional labor and hundreds of dollars in unnecessary materials and expenses.
What are dyeing defects?
Bleeding: loss of colour from a dyed fabric when immersed in a liquid or colour is discharged in to a liquid medium and transfer to another fabric. A loss of dye of fabric or yarn up on wet treatment. The colour runs when wet and will stain on contact.