Can I use Citristrip on mirror?
Add Citristrip to the backside of the mirror (I used a foam brush), cover with plastic wrap, and let sit for a couple hours. The plastic wrap helps the strip not to dry out too fast. Some mirrors take longer than others to strip.
Does citrus strip work?
CITRISTRIP worked great. I applied a thin layer over all of paint splotches, let it sit for 30 minutes, and then used a plastic scraper to remove the paint. The paint came up easily with just a little effort. CITRISTRIP has no harsh fumes and a somewhat pleasant citrus scent.
How do you antique a mirror with vinegar?
Steps
- PREPARE. Remove the glass from the frame and wipe with a dry cloth to get rid of any dust.
- MIX AND SPRAY THE SOLUTION. Mix a solution of one part vinegar to two parts water into a spray bottle.
- SPRAY THE MIRROR.
- DAB OFF THE VINEGAR SOLUTION.
- PAINT THE BACKING BOARD.
- PUT THE FRAME BACK TOGETHER.
How do you antique a mirror with paint stripper?
Spray the Back of the Mirror with a Bleach Water Solution. Once you have stripped off as much of the backing as you want, then you use the bleach to actually created the antiqued look. The paint stripper alone will remove both the backing and the gold layer if you let it.
Will acetone damage a mirror?
It can damage plastic mirrors. Glass should be immune unless it is silvered on the surface you want to clean.
How do you remove silvering from the back of a mirror?
Use a cotton ball or soft cloth to wipe Mirror Remover over the metal layer. You do not need to rub – Mirror Remover dissolves clean copper and silver in seconds. Apply fresh Remover when the dissolving action stops. Wash the bare glass well with Concentrated Cleaner and warm water to remove all chemical residue.
Can you leave Citristrip on too long?
As I proved above, yes you can leave Citristrip on too long. According to the manufacturer, Citristrip paint and varnish stripping gel will stay active and remove layers of unwanted paint and finish for up to 24 hours as long as it remains wet.
Do I have to use mineral spirits after stripping?
Citrus strippers such as CitriStrip have a wax in them to keep the product from drying out after it’s applied to the surface. Mineral spirits is recommended after the stripping solution because it’s important to break down those waxes before getting started.
Can you fix a tarnished mirror?
On small discolored or tarnished spots on the back of a mirror, use the abrasive side of a kitchen sponge to scrub off the discoloration. Try to avoid enlarging the affected area. Patch these spots with a piece of Mylar film (available at art supply stores) or an ordinary piece of heavy-duty aluminum foil.