How do I unlock my thermostat screen?

Posted on by Muna Meyer

How do I unlock my thermostat screen?

Press the UP/DOWN buttons to change each flashing digit, using the NEXT button to cycle through which digit is flashing. Press and hold the NEXT button for at least 5 seconds. The thermostat will return to the Normal Run screen without the padlock, and the thermostat is now unlocked.

How do I reset my Trane touchscreen thermostat?

All Thermostat Models

  1. MAKE SURE THAT THE HVAC SYSTEM IS IDLE BEFORE PROCEEDING!
  2. Locate the switch for your thermostat in the breaker box.
  3. Flip the switch to the OFF position for 20-30 seconds.
  4. Return the switch to the ON position.
  5. The reboot process will take several minutes to complete.

How do you unlock a Trane AC remote?

Put one finger on the “+” button and one finger on the “-” button. Press both these buttons simultaneously. Hold these buttons down for four to five seconds and then release. The Trane thermostat should now be unlocked.

How do I unlock the control temperature on my thermostat?

How to Unlock a Carrier Thermostat

  1. Locate the “MODE” and arrow (“Up” and “Down”) buttons on your Carrier thermostat control. Video of the Day.
  2. Press and hold down “MODE.”
  3. Press both the “Up” and “Down” arrow buttons simultaneously.
  4. Wait a second. The “Locked” icon disappears from the screen.

How do I lock my Trane touchscreen thermostat?

Lock Trane Programmable Thermostat Keypad

  1. First, you need to press on “Menu”.
  2. Press and hold the “Next” button for 5 seconds.
  3. Press OK, then the device will ask you 4 digit code that you would like to set for unlocking the thermostat.
  4. You can lock it with default “0000” or change as per your requirement.

Why won’t my Trane thermostat come on?

Your thermostat/control may be off or set incorrectly. Check temperature setting on thermostat/control. If no change, contact your local Trane Dealer. In the meantime, try turning off your thermostat/control for 1 to 3 hours to see if it will reset itself.

How do I remove the lock on my AC remote?

To unlock your AC remote, press and hold the plus (+) and minus (-) button at the same time. The first time you do this, the remote control may lock. Press the buttons again and it should unlock.

How do I unlock my Toshiba thermostat?

Push and hold the [ CANCEL] button for more than 4 seconds again to release the key lock. “ ” appears on the screen when the button set to be locked is pushed while the key lock function is activated.

How do I get my Trane thermostat off hold?

Tap the button that says Run Schedule. Select Permanent Hold. Your thermostat is now in Hold mode. To revert back to your regular schedule, tap Hold and then select Run Schedule….

  1. In the Hold Options menu, use the up and down arrows to select your desired setpoint.
  2. Click Adjust Hold Time.

How do you turn off the schedule on a Trane thermostat?

Disable Schedules From the Thermostat: Press Menu on your XL824/850/1050 thermostat. Select Schedules & Presets. Tap the On/Off toggle at the bottom of the screen to enable or disable schedules.

Why does my thermostat keep blinking?

If your the screen on your thermostat is blinking, it may just mean that the battery is low, and this is simply your unit’s way of telling you to replace its batteries before it dies entirely. If this is the case, unscrew the thermostat from your wall and replace its batteries.