What is elastomeric infusion pump?
An elastomeric pump, also known as a balloon pump or ball pump, is a medical device used for infusing medication. Depending on the therapy needed, these medications might include antibiotics, chemotherapy, 5FU, cytostatics, analgesics, and local anesthetics.
How do Baxter pumps work?
Baxter Elastomeric Pumps are non-electronic medication pumps designed to provide ambulatory infusion therapy. Medication is delivered to the patient as the elastomeric “balloon” consistently deflates and gently pushes solution through the IV tubing and into the catheter/port.
How do you fill a Baxter pump?
The Infusor is filled by injecting the medication through the Fill Port using a syringe or filling system with a Luer-lock tip. Use aseptic technique throughout. Do not use needle when filling the Infusor device. Place the head of the filled syringe plunger on a work surface.
How does 48 hour chemo work?
The infusion is commonly set up as continuous, in which the patient will be hooked up to small pump (about the size of a Walkman, if you’re old enough to know that reference!). The pump is programmed to infuse chemotherapy very slowly, administering a few milliliters every hour to last for 46–48 hours.
How does elastomeric device work?
How does the elastomeric device work? The elastomeric device has a “balloon” that holds the medication. As soon as your elastomeric device is connected to your IV catheter, and the clamp is in the open position, it will immediately start delivering your medication.
How do you sleep during chemo pump?
Don’t keep your pump under a warm jacket or blanket. This can make the pump too warm and cause the medication to flow too fast. At bedtime, keep your pump next to your side and above your blankets. Don’t hang it on your bedpost or put it on the floor.
How do you initiate an infusion using an IV elastomeric pump?
Remove the cap on the Elastomeric Pump IV tubing. Unclamp the tubing on the medicine ball (Elastomeric Pump) to ensure there is no air in the line and that it works properly. 3. Attach the Elastomeric IV tubing to your IV line and infuse the medication as directed.