What is clerestory in architecture?
clerestory, in architecture, any fenestrated (windowed) wall of a room that is carried higher than the surrounding roofs to light the interior space. In a large building, where interior walls are far from the structure’s exterior walls, this method of lighting otherwise enclosed, windowless spaces became a necessity.
What is the purpose of clerestory windows?
Clerestory (pronounced “clear-story”) windows are large windows placed above eye level to illuminate an interior space with natural light. They’re typically placed in a row right below the roofline, but they can also sit above roof lines or overhangs to maximize the amount of light in a given space.
Should clerestory windows open?
By opening up clerestory windows on such nights, you allow the more bouyant warmer air to escape out the window. This makes a slight lower pressure inside. If you also then open ground level windows, the cooler night air is then drawn into the house to replace it.
Are clerestory windows shown in plan?
If it is a clerestory Window that is well above the cut plane, you may want to indicate the Window in a plan view, but use different graphics than you would for one that is actually cut by the cut plane, so that it is apparent in the plan view that the Window is above the cut plane.
How does a clerestory work?
Because they are placed high up compared to other windows, clerestories can deliver sunlight far deeper into a living space than normal vertical glazing. Their main function is twofold: they deliver extra daylighting and they provide a method of heating thermal mass in north walls which would normally be in shade.
How tall should clerestory windows be?
There really are no set rules when it comes to clerestory window dimensions. Even small windows such as a 2′ x 2′ can let in plenty of natural light while the height of their installation may keep the glare down inside the space.
Do you show clerestory windows in plan?
Where is the clerestory found?
A clerestory is a type of window that is usually found at or near the roof line. It often takes the form of a band of windows across the tops of buildings that allow natural light in without compromising privacy or security.
How much does it cost to add clerestory?
Installation can cost anywhere between $800 and $2500 due to the location of the window opening and how much extra framing is needed to fill in the space. On average, this would put the total cost between $2500 and $3500.