How do you program a key fob for a Pontiac Grand Am?

Posted on by Muna Meyer

How do you program a key fob for a Pontiac Grand Am?

RELEASE the UNLOCK switch on the Driver’s side door. Vehicle will respond with 3 chimes to indicate successful entry into Programming Mode. PRESS and HOLD the LOCK and UNLOCK buttons on the first remote to be programmed for 15 seconds until the vehicle chimes twice indicating successful programming of the remote.

How do you program a key fob for a 2002 Pontiac Grand Prix?

Press and hold the remote LOCK and UNLOCK buttons simultaneously for 14 seconds. IMPORTANT: After 7 seconds, a chime may be heard confirming successful synchronization. It is necessary to wait approximately 14 seconds for a second chime that will confirm successful programming.

Can you program a key fob by yourself?

Can you program a new key fob yourself? If it is only the key fob itself to unlock the car, you can most often program it yourself. However, programming a key for the start function is impossible without the right tools.

How do you program a blank key fob?

BLOG

  1. STEP 1-Turn on the ignition. You should sit in the driver’s seat with both the ignition key and the key fob with all doors closed.
  2. STEP 2-Press the lock button.
  3. STEP 3-Turn off the ignition.
  4. STEP 4-Repeat the process with other key fobs.
  5. STEP 5-Restart the process.

How do you program a 2001 Pontiac key?

2001 Pontiac Firebird

  1. Insert Key Into Ignition. INSERT key into Ignition and TURN to RUN and then back to OFF (RUN is the position just shy of cranking the engine.
  2. Remove Radio Fuse.
  3. Enter Programming Mode.
  4. Program Remote.
  5. Program Additional Remotes.
  6. Exit Programming Mode.
  7. Test Remotes.
  8. Share.

Can you program a key fob that’s already programmed?

You could reprogram a key fob to a different vehicle as long as the key is the same for the vehicle. Remove the battery cables from the vehicle, wait 30 seconds, then hook them back up (reset computer). Put the key in the ignition and turn the key to the ‘ON’ position. Turn the key to the ‘OFF’ position.

How do you program a key fob for a 2005 Pontiac Grand Am?

2005 Pontiac Grand AM Key and Remote Pairing Instructions

  1. Insert a master/working key and switch the ignition on.
  2. Wait for the security/immobilizer light to go out.
  3. Quickly insert an unprogrammed key and switch the ignition on.
  4. Wait for the security/immobilizer light to go out.
  5. The key is now programmed.

How do you program a key fob for a 1999 Pontiac Grand Am?

Program Remote PRESS and HOLD the LOCK and UNLOCK buttons on the first remote to be programmed for 15 seconds. System should now cycle door locks LOCK / UNLOCK and activate trunk release to indicate successful programming of the remote.

How do you program a 2001 Pontiac Key?

How do you program a Pontiac Grand Prix key fob?

Put your key into the ignition, and turn to “ACC.” Turn the key on and off within a second. Open and close the driver’s door and listen for the chime that indicates you are in programming mode. Press and hold the LOCK and UNLOCK buttons for 14 seconds, listening for the chime. Wait 14 seconds for the second chime.