What is the floppy cable used for?
A floppy cable is a ribbon cable found in PC’s that allow one or more floppy disk drives to connect to a computer.
Which type of cable is used by floppy drives?
Floppy Disk Drive Cable The cable uses a 34-pin IDC connector [requiring a 34-pin device header], and a 34-pin flat ribbon cable [IDC Definition]. The connector size differ between the two drive types, with the 5.25″ drives requiring a larger connector.
How does a floppy disk drive work?
A floppy drive is a magnetic medium that stores and reads data on the floppy disk using a read head. When a 3.5″ floppy diskette is inserted into the drive, the metal slide door is opened to expose the inner magnetic disk. Reading this as binary data, the computer can understand what the data is on the platter.
What is floppy drive connector in motherboard?
Most motherboards produced today include both the floppy disk and hard disk interfaces on the motherboard. Floppy Connectors. They connect to floppy disk drives (FDDs). It is a 34 pin ribbon connector that carries data between the motherboard and any floppy drive installed in the PC.
Do floppy drives use IDE?
In answer to your A2A, yes floppy drives did use IDE interfaces to transfer data from the motherboard to the floppy drive via this cable. Some things you have to remember is the IDE interface does not support hot plugging like you can with a USB device.
Why are floppy cables twisted?
The cable twist allows both floppy drives to be configured identically (for drive selection) when installed (for manufacturing convenience), yet operationally, can be uniquely selected as either the first drive or the second drive based on cable position.
Is floppy disk input or output?
Floppy disk drive is input as well as output device. In the earlier year computer generation, the floppy disk as in-built type. But, in present time, the floppy disk is replaced By CD ROM.
Why is floppy disk called floppy?
The floppy disk drive (FDD) was invented at IBM by Alan Shugart in 1967. The 5.25-inch disks were dubbed “floppy” because the diskette packaging was a very flexible plastic envelope, unlike the rigid case used to hold today’s 3.5-inch diskettes.