Can I use chain lube on seatpost?
Greasing your seatpost will prevent problems like this: “Removing Seat Post rusted into downtube”. Don’t use chain oil, grease is what you want. As whatsisname pointed out, all fasteners on your bike should be lightly greased. This is what keeps them from corroding and seizing over time, becoming a real pain to remove.
How do I stop my carbon seatpost sticking?
Pop the seatpost out and turn the frame upside-down to drain out any trapped water. Carbon doesn’t like harsh chemicals. A little silicone spray on a rag is enough to clean the dirt off.
Are carbon seat posts more comfortable?
As is consistently the case, aluminium is perfectly adequate and will do the job. Carbon seatposts, however, offer greater dampening from road vibrations and are lighter. If you don’t feel your bike needs to be any more comfortable, and you’re not fussed about 100 grams, then aluminium seems like a smart choice.
Should you grease a carbon seatpost?
Our advice is simple: If the seatpost fits tight,grease it. If it slips, de-grease it. As has been known formany years, when aluminum and carbon fiber contact each other, galvaniccorrosion can start.
Do I need to grease a carbon seatpost?
You should grease your seatpost on the segment that fits into the seat tube to prevent oxidation and corrosion. However, you shouldn’t grease carbon fiber seatposts with regular grease. Carbon installations require different treatment from steel or aluminum.
Can you put a carbon seatpost in an aluminium frame?
A carbon seat post may get stuck in an aluminum frame even when carbon paste is applied. The chances are low, but the outcome is not unheard of when the seat post isn’t removed over a long period.
Can you put a carbon seatpost in an Aluminium frame?
Can I use lithium grease on carbon?
Grease won’t harm the carbon fibre.
How often do carbon frames crack?
If the carbon bike frame is not ridden often and is stored properly, you can expect to replace the frame every 9-10 years. Of course, a lot of riders can get more years than that out of their carbon bike frames, however, the manufacturers do not recommend pushing the limits of carbon parts.