What is the meaning of PSC action code 15?
Rectify deficiency at next port
CODE 15. Definition: Rectify deficiency at next port. Application: this code is used when a deficiency cannot be remedied in the port of inspection. In such case the maritime authority may allow a ship to proceed to another port, if appropriate under conditions as determined by the port of inspection.
What do code 17 Port State Control deficiencies mean?
be rectified before departure
To be rectified before departure (code 17) Used for a deficiency which: should be rectified before the ship sails but is not serious enough to warrant detention, or/and can reasonably be rectified before the ship sails.
What are the Detainable deficiencies?
Absence, non-compliance or substantial deterioration to the extent that it cannot comply with its intended use of fire detection system, fire alarms, fire-fighting equipment, fixed fire- extinguishing installation, ventilation valves, fire dampers and quick-closing devices.
How many types of PSC inspection are there?
When a PSC inspector boards the vessel, he would conduct one of the four types of PSC inspections.
Can FLAG State detain a ship?
In Article 97(3) a limitation is imposed on territorial enforcement, in relation to high seas conduct: “no arrest or detention of the ship, even as a measure of investigation, shall be ordered by any authorities other than those of the flag state”.
What happens when deficiencies are revealed onboard?
What happens, when deficiencies are revealed on board? Often port state control officers reveal deficiencies during the inspection of a ship. The inspector discusses these deficiencies with the ship’s master and notes them in his inspection report. He determines a deadline for the rectification of each deficiency.
What is the most common PSC deficiency?
Code 17 deficiencies are the most common deficiencies during PSC inspections. All the deficiencies with code 17 must be rectified before departure.
What should do you after you have rectified a deficiency before departure?
If a deficiency which is to be rectified before departure is verified by a PSCO as rectified before the ship departs it should be recorded as rectified. Safety management audit by the Administration is required before departure of the ship.
What is the most common Detainable item?
The 18 most frequent detainable deficiencies were found in the following technical categories as defined by the PSC regimes:
- 03(…) – Water/weathertight condition.
- 04(…) – Emergency systems.
- 07(…) – Fire safety.
- 10(…) – Safety of navigation.
- 11(…) – Life saving appliances.
- 13(…) – Propulsion main engine.
- 14(…)
What are the four types of PSC inspection?
Inspection Categories
- High Risk Ships – time window between 5-6 months after the last inspection.
- Standard Risk Ships – time window between 10-12 months after the last inspection.
- Low Risk Ships – time window between 24-36 months after the last inspection.
What is ISP code?
International Ship and Port Facility Security Code
What is the ISPS Code? ISPS or the International Ship and Port Facility Security Code is an essential maritime regulation for the safety and security of ships, ports, cargo and crew. The biggest challenge the world is facing today is fighting terrorism.
What is the No More Favourable treatment rule?
A rule in major IMO conventions that, when inspecting a ship flying the flag of a State which is not a party to the Convention, Port State Control Officers must ensure that the treatment of such a ship and its crew is not more favourable than that of a ship flying the flag of a State party to that Convention.
What is the new PSC code for IT services?
PSC D305 IT and Telecom – Teleprocessing, Timeshare, and Cloud Computing was end dated on May 19, 2019. Two new service codes, PSC R616 – PHYSICAL RECORDS MANAGEMENT SERVICES and PSC R617 – ELECTRONIC RECORDS MANAGEMENT SERVICES, were activated on 5/20/2019.
What is a PSC 5 I code?
5 I. Introduction The Product and Service Codes (PSC) Manual provides codes to describe products, services, and research and development (R&D) purchased by the federal government. These codes indicate “WHAT” was bought for each contract action reported in the Federal Procurement Data System (FPDS).
What does PSC stand for?
Product Service Codes (PSCs) Also referred to as federal supply codes, product service codes are used by the United States government to describe the products, services, and research and development purchased by the government. Government procurement specialists and government contractors alike require a solid understanding…
What’s new in the PSC manual for 2019?
The PSC Manual has been updated as June 2019 to reflect the following changes: 1. Two new service codes, PSC R616 – PHYSICAL RECORDS MANAGEMENT SERVICES and PSC R617 – ELECTRONIC RECORDS MANAGEMENT SERVICES, were activated on 5/20/2019. 2.